Aluminum Window Combining End Milling Machine

Descriptions
1. This aluminum end milling machine is suitable for milling end faces and step faces of various aluminum profiles. It has a large processing range and can process multiple profiles at the same time.
2. The four milling cutters are driven by motors, and the adjusting slide adopts a T-shaped guide rail to ensure machining accuracy.
3. The feeding system of the aluminum end milling machine worktable uses a motor to drive a ball screw drive, which runs smoothly.
4. Adopt hard alloy standard original disc milling cutters, which are respectively installed on four motor shafts, which can be adjusted according to the height of the profile.
5. The profile compaction adopts a pneumatic control system and is completed by a button switch, which is stable and reliable.
6. Need not ordering tools when processing various profiles, thus can decrease cost and save time.
7. Large tool diameter, high milling speed, and good processing results and it is an important aluminum window machine for making aluminum windows and doors.

Aluminum end milling machine milling cutters and adjust handwheel as shown below.

Technical Parameters

Input Voltage	380V/50Hz
Input power	6.6Kw
Rating oil pressure	12MPa
Motor rotary speed	2800r/min
Dimensions:(Width×Depth×Height)	1850×1700×1200mm
Air working pressure	0.5~0.8MPa
Weight when empty	850Kg
Diameter of main shaft	φ32mm
Diameter of milling cutter	Φ250mm
Worktable journey	0~1560mm
Worktable dimension	530×320mm
Max processing high size	0~68mm
Max processing tenoning size	0~45mm